Installation guide
Table Of Contents
- NVR2
- Quick Installation Guide
- 1. Introduction
- 2. Safety Instructions
- 3. General Guidelines
- 4. Features
- 5. Overview
- 6. Installing the hard disk drive
- 7. Connection Diagram
- 8. Information and Panels on the Monitor
- 9. Configuration of camera on LAN Port plug and play
- 10. Quick Operation
- 11. Push Video configuration
- 12. Technical Specifications
- Korte handleiding
- Guide d'installation rapide
- 1. Introduction
- 2. Consignes de sécurité
- 3. Directives générales
- 4. Caractéristiques
- 5. Description
- 6. Installer le disque dur (HDD)
- 7. Diagramme de connexion
- 8. Symboles
- 9. Configurer la caméra sur un port LAN (Plug and Play)
- 10. Barre de menu rapide
- 11. Configurer la fonction push video
- 12. Spécifications techniques
- Guía rápida
- 1. Introducción
- 2. Instrucciones de seguridad
- 3. Normas generales
- 4. Características
- 5. Descripción
- 6. Instalar el disco duro (HDD)
- 7. Esquema de conexión
- 8. Símbolos en la pantalla
- 9. Ajustar la cámara en un puerto LAN (Plug and Play)
- 10. Barra con menú rápida
- 11. Configurar la función Push Video
- 12. Especificaciones
- Schnelleinstieg
- Warranty - garantie - garantia
NVR2
V. 01 – 04/03/2013 9 ©Velleman nv
10.2 Viewing a Channel in Full-Screen Mode
To view a channel in full screen mode, you can:
Click directly on the channel image to see that channel in full screen mode. Double-click the image to
restore the previous overview.
In the quick operation panel [18], click . On the control panel that appears, select the channel you
want to display in full screen mode. Click to restore the previous overview.
10.3 Playing Recorded Video Clips
1. Make sure that manual and/or event recording is enabled: in the main menu [19], click (ADVANCED
CONFIG) and select RECORD to check or adjust the settings.
2. In the playback panel [20], press the play button . The recorded files are shown.
3. The fast forward and fast rewind buttons increase/decrease the playback speed. Press the button
repeatedly to increase/decrease the speed to 4x, 8x, 16x, or 32x (max.).
4. Press the pause button to pause playback.
5. Press the stop button to stop playback and return to live monitoring.
11. Push Video configuration
11.1 Configuring the WAN port
1. Make sure the NVR is properly connected to the router with a RJ45 network cable.
2. From your NVR, select (ADVANCED CONFIG), and select “Network” “WAN”.