User Manual Model: ET-AR504LR-BK 2.
1. Package Contents 1. 2. 3. 4. ETAR504LR-BK speaker system Wireless remote with battery User manual 3.5mm to RCA audio cable TRE+ TRE- RESET BASS+ MUTE BASS- Manual MAST+ MAST- 2. Safety Instructions Caution: Electric Shock Hazard When using this electronic appliance, basic precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following: 1. 2. 3. 4. Do not use this product near water i.e. bath tub or swimming pool.
. Product Overview 16 15 1 TRE+ TRE- 2 8 3 9 13 AUDIO INPUT 14 RESET MUTE BASS- MAST+ AUDIO OUTPUT 4 10 12 POWER SOURCE 5 7 MAST- 11 6 19 1. Status LED 7. Power cord 14. Bass- 2. Menu 8. Audio input 1 15. Tre+ 9. Audio input2 16. Tre- Displays Volume, Treble, Bass, EQ Switches functions: Volume, Treble or Bass Connects to 110V AC outlet Auxiliary 3.5mm plug 3. Up arrow Increases volume or adjusts selected menu function 10. Power switch 4. Down arrow 11.
. Product Setup 1. Connect the 3.5mm end of audio cable to your music device. 2. Connect the RCA end of audio cable to back of the system. Only one audio input may be used at a time. 3. 4. 5. AUDIO INPUT 1 OR Connect the power cord to an 110V AC outlet. Turn on the power and slowly increase the volume until reaching a comfortable level. Adjust treble or bass as needed.
. Understanding LCD Display 1. 2. 3. 4. 5. Mute Indicator Indicates if the system mute has been turned on or off CD Input Indicator (models with CD input) Indicates if the system is currently using the CD input Auxiliary Input Indicator (models with Aux input) Indicates if the system is currently using the Aux input Power On Indicator Indicates if the system is turned on or off Volume Indicator Indicates if the system is being set to Volume Adjustment Mode 6. 7. 8.
. Using Front Panel Controls (Volume • Bass • Treble • Equalizer) 1. The LCD area displays your current selection. 2. Press the Menu button until you have selected your desired function.
. Using the wireless Remote Adjusting Volume/Mute using Remote Control 1. Press Mast+ button to increase volume level and Mast- button to decrease volume level. 2. Press Mute to turn on/off master volume. Press again to resume previous volume level. Adjusting Treble/Bass using Remote Control 1. Press Tre+ button to increase bass level and Tre- button to decrease bass level. 2. Press Bass+ button to increase volume level and Bass- button to decrease volume level. Resetting EQ Levels using Remote Control 1.
. Optimum Settings 1. For best reception, always point the remote control at the LCD display area. The remote control’s effective range is approximately 10ft. 2. For best tonal fidelity, we recommend setting your audio source to line level output and use the speaker to control overall volume level. 3. For best tonal fidelity, we recommend using the default EQ levels so you hear the music at exactly the same way it was recorded.
. Specification • Total RMS Power: -Satellites: -Subwoofer: • Total Peak Power: • Frequency Response: • Drivers: -Satellites: -Subwoofer: • Speaker Dimension (H x W x D): -Satellites: -Subwoofer: 35 Watts 10 Watts RMS x 2 (into 4 ohms, @ <=1% THD) 15 Watts RMS x 1 (into 4 ohms, @ <=1% THD) 70 Watts 20Hz to 20kHz Dual 3-inch midrange and 1-inch tweeter with solid wood enclosure 5.25-inch drivers with solid wood enclosure 4.33” x 9.65” x 4.77” 6.7” x 11.03” x 10.
. Regulatory Compliance FCC Class B Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.
12. Contacting Us Visit us online at www.eagletechusa.com and submit your request to the appropriate departments: Customer Service http://contact.eagletechusa.com/ FAQ http://faq.eagletechusa.com/ RMA http://rma.eagletechusa.com/ Eagle Tech Computers, Inc. 17531 Railroad St. Ste D City of Industry, CA 91748 USA www.eagletechusa.com Phone: 626.956.4040 Fax: 626.810.4820 © 2008 Eagle Tech Computers, Inc. All rights reserved.
Eagle Tech Computers, Inc. www.eagletechusa.com Phone: 626.956.4040 Fax: 626.810.
