Fish-finding Sonars & Mapping GPS Model FishElite 502C iGPS Manual Installation and Operation Instructions

124

Waypoint will delete the waypoint from the route. View Waypoint will

show you where the selected waypoint is on the map.

NOTE:

When adding waypoints to a route, the inserted waypoints will ap-

pear in the route in front of the waypoint you have selected. To in-

sert waypoints at the end of the route, select

(ROUTE END) before

adding them.

Navigate a Route

1. From the

NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,

press

MENU|MENU|↓ to ROUTE PLANNING|ENT.

Route Planning command on Main Menu (left). Routes menu (center).

Edit Route menu (right). Navigate Route command is selected.

2. Press ↓ to select route name|ENT, then use the arrow keys to select

NAVIGATE ROUTE from the action window and press ENT.

3. Upon arrival at your destination, cancel navigation by pressing

The following figures show what the Navigation Page and Map Page

look like while navigating a route.

Navigate a Route in Reverse

Here's how you run a route backward, from the end waypoint to the

beginning waypoint:

1. From the

NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,

press

MENU|MENU|↓ to ROUTE PLANNING|ENT.

2. Press ↓ to select route name|

ENT. Use the arrow keys to select

REVERSE ROUTE from the action window|ENT|← to NAVIGATE ROUTE|ENT.

3. Upon arrival at your destination, cancel navigation:

press