Specifications

3.3. Rack Mounting

An optional Rack Mount Kit is available for the E7 for mounting the appliance in a 19-inch rack.

This kit must be ordered as a separate product and is not included as standard. Included with the

kit is the following:

• 1 x side bracket for rack mounting including 2 fitted hex screws.

• 1 x side bracket for rack mounting with PSU mounting space including 2 fitted hex screws.

• 1 x plastic cable tie for securing the PSU to the rack mount.

The kit is attached to the sides of the E7 unit prior to mounting in the rack. The steps for

attaching the kit are as follows:

1. Take the bracket with the space for the power supply (PSU) and attached this to the E7 side

nearest from the power inlet. Do this by slotting the brackets hooks into the fan vents on

the side.

2. Push the bracket forward so it engages with the vents.

Chapter 3: E7 Installation