User's Manual

G2 HANDPORTABLE INSTALLATION HANDBOOK

4/6 10/1999

IH – PS7912EAC01

This document is the property of MATRA NORTEL COMMUNICATIONS and should not be copied or circulated without permission

SAFETY PRECAUTIONS

Antenna

• The antenna must not be bended with an angle greater than 90

Pack battery

• The pack battery must not be:

short–circuited,

dismantled,

thrown into fire,

exposed to high temperatures (> to 60°C/140°F).

• Use appropriate collectors for worn pack batteries.

INSTALLATION (see Plate A–I)

Belt clip (option)

• Insert the belt clip (item 2) in the battery pack (item 1).

Battery pack

• Align the six battery pack tabs (item 9) with the six handportable slots (item 8).

Insert the tabs in the slots.

• Slide the battery pack (item 1) until it is locked inside.

• To remove the battery pack: press the unlocking button (item 3) and withdraw

the battery pack.

Antenna

• Make sure the seal (item 5) is installed on the tip of the antenna (item 6).

• Screw the antenna on the handportable antenna connector (item 4).

• Gently tighten the antenna.

Note: To be operational, the G2 handportable must be charged, configured and

personalized with the TPS.