User's Manual

VOLUME CONTROL
The and keys are used to adjust individually the level of
the ringing tones, tones and beeps, the voice volume and that of
the external loudspeaker if one is used with the CCP (optional).
There are 8 levels, which are stored in the terminal when it is switched
off.
The external loudspeaker must be activated or deactivated using
the "
LLOOUUDDSSPPEEAAKKEERR
" function in the Terminal Menu (see Terminal Menu
chapter). When the external loudspeaker is activated, it re-transmits
the ringing tones, tones and sound; the beeps are not re-transmitted.
Adjusting the volume of the ringing tones, tones and beeps
The terminal must be on standby to carry out the adjustment. It concerns
the volume re-transmitted by the LS/micro loudspeaker and the external
loudspeaker when it is activated.
Press or . The terminal emits an acknowledgement beep corresponding to the level
selected and displays:
Adjusting the voice volume
To adjust the voice volume, the terminal must be engaged
in a communication, with the external loudspeaker deactivated. The
adjustment applies to the volume of the LS/micro loudspeaker.
Press or . The terminal displays the level of the volume adjusted:
Adjusting the external loudspeaker volume
To adjust the volume of the external loudspeaker, the terminal must
be engaged in a communication, with the external loudspeaker
activated. The adjustment applies to the volume of the LS/micro
loudspeaker and the external loudspeaker.
Press or . The terminal displays the level of the volume adjusted:
How to use the terminal
9
RR II NN GG II NN GG VV OO LL
__ __ __ __
00 11
EE AA RR PP HH OO NN EE
__ __ __
00 11
LL OO UU DD SS PP EE AA KK EE RR VV OO LL
__ __ __ __ __
00 11
CCP MC2 V35 EN LB 17/10/01 14:12 Page 9