User's Manual

THE SCAN FUNCTION
The scan function is used to listen to between 2 and 6 open channels
or talkgroups in turn (depending on the option).
The open channel scan can operate in priority mode or non-
priority mode, depending on the configuration of the terminal.
The talkgroup scan operates in non-priority mode.
In priority mode, the first open channel in the list is declared
the priority channel. The terminal automatically switches over to this
open channel as soon as it is activated. When the priority open channel
is inactive, the terminal can listen to other open channels in the list, but
cannot take part in them. The Push-to-talk key is permanently associated
with the priority open channel.
In non-priority mode, all calls (open channel or talkgroup) have
equal status: the terminal listens to the first activated call. By default,
the Push-to-talk key is associated with the first call in the list or with the
active call.
Scan
52
CCP MC2 V35 EN LB 17/10/01 14:12 Page 52