User's Manual

PRFCIAL COM. (Preferential communication)
The Preferential communication function is used to favour
the active group communication with regard to radio reception criteria.
The preferential communication may be, depending on the project,
an open channel, a talkgroup (Talkgroup mode), the default group
called (Group call mode), the emergency open channel or a scan
priority communication in priority mode.
The function is available when the terminal is on standby or in group
communication and remains active at the end of the communication.
The status of the function is stored when the terminal is switched off.
Activating/deactivating a preferential communication
1. Press 3 times to select the "
OOPPTTIIOONNSS
" sub-menu.
2. Press , then twice to select the "
PPRRFFCCIIAALL CCOOMM..
" function. The terminal displays
either:
or
If the function is inactivate If the function is active
3. Press to confirm the command.
VAL
VAL
GRP
Open Channel or Group Menu
49
PP RR FF CC II AA LL CC OOMM..
OO NN ??
00 11
PP RR FF CC II AA LL CC OOMM..
CC AA NN CC EE LL ??
00 11
CCP MC2 V35 EN LB 17/10/01 14:12 Page 49