User's Manual

Opening an open channel
This function is only available to terminals authorised at customisation.
If the terminal is not authorised, the function is not displayed.
To open an open channel, the terminal must be registered with the BN
corresponding to the open channel which is to be opened.
1. Press , then to select the "
OOCC
" sub-menu.
2. Press twice then to select the "
OOPPEENN
" function. The terminal displays:
3. Dial the open channel number (1 to 3 digits).
4. Press to open the open channel.
Closing an open channel
This function is only available to terminals authorised at customisation.
If the terminal is not authorised, the function is not displayed.
1. Enter the open channel.
2. Press , then to select the "
OOCC
" sub-menu.
3. Press 3 times, then to select the "
CCLLOOSSEE
" function. The terminal displays:
4. Press to close the open channel.
VAL
VAL
GRP
VAL
VAL
GRP
Open Channel or Group Menu
36
OO PP EE NN
OO CC ??
00 11
CC LL OO SS EE
OO CC 11 22 33
00 11
CCP MC2 V35 EN LB 17/10/01 14:12 Page 36