User's Manual
Table Of Contents
- CCP MC 2610 V35/EN
- NOTICES TO BE READ BEFORE USE
- Contents
- Functions of the keys
- Display
- How to use the terminal
- How to place a call
- Receiving a call or a message
- Open Channel or Group Menu
- Scan
- Direct Menu
- Memory Menu
- Message Menu
- Extension Menu
- Terminal Menu
- Procedure in the event of a problem
- Tips
- Definitions
- Index
How to place a call
21
TALKING
1. When the call is set up, press PUSH-TO-TALK to speak. Wait until the transmit indicator lights red
before speaking.
N.B.: the transmit LED can be disabled using the "
LLEEDDss
" function in the Main Menu.
2. Release the PUSH-TO-TALK when you have finished speaking.
SPEAKER IDENTITY (Optional)
When a call is set up, the person speaking is identified on the
display of the monitoring terminals where his number (or address)
flashes.
This is displayed for the following communications: open channel,
group, open channel or group scan, IDR or direct mode emergency call.
It is not displayed in private calls.
Only the field(s) of the speaker's address which are different from
the address of the called terminal is/are displayed.
Broadcast of the terminal address can be masked when the terminal
is customised via the TPS. In this case, the called terminal does not
display the address of the calling terminal.
ENDING A CALL
• Press and hold down . The terminal displays:
CC AA LL LL OO VV EE RR
00 11
CCP MC2 V35 EN LB 17/10/01 14:12 Page 21