User's Manual
Table Of Contents
- CCP MC 2610 V35/EN
- NOTICES TO BE READ BEFORE USE
- Contents
- Functions of the keys
- Display
- How to use the terminal
- How to place a call
- Receiving a call or a message
- Open Channel or Group Menu
- Scan
- Direct Menu
- Memory Menu
- Message Menu
- Extension Menu
- Terminal Menu
- Procedure in the event of a problem
- Tips
- Definitions
- Index
How to use the terminal
13
USING THE CALL SELECTOR
The multi-position call selector is used to access all calls stored in the
directory (99 calls). Turn the call selector to change the selected position.
The position selected is displayed at the top right of the display.
Changing the position of the call selector causes:
• permanent exit from the current call.
• automatic initiation of the call corresponding to the new position (at
the end of a one-second timeout), unless there is no call associated
with the new position.
USING THE MENUS
The terminal has 6 scroll-down menus:
Terminal, Memory, Open Channel or Group (depending on the option),
Message, Direct and Extension.
Each menu is associated with a specific key.
To select a menu:
• Terminal menu: press .
• Memory menu: press .
• Open Channel or Group menu: press .
• Message menu: press .
• Direct menu: press .
• Extension menu: press .
EXT
DIR
GRP
MENU
Selector Position Displayed
On/Off Button
Call Selector
MC 2610
CCP MC2 V35 EN LB 17/10/01 14:12 Page 13