User's Manual

How to use the terminal
12
USING THE KEY
While entering a character (depending on V35 software
version)
• pressing the key deletes the last character entered.
While displaying a menu
• one press returns to the next level up.
While displaying an information message
• one press erases the information message.
USING THE CALL KEYS
(Push-to-talk, , and )
The push-to-talk key on the LS/micro is used to accept a call
or talk during a call. Talking is possible only when the transmit
indicator is on red.
The key is used to place or accept a call.
As an option, a long press on changes the registration base
station or forces registration of the terminal with:
• a base station which is part of the coverage of the preferred
communication if the "
PPRRFFCCIIAALL CCOOMM..
" function is active (see sub-
menu “
OOPPTTIIOONNSS
” in the Main Menu), or,
• a base station which is part of the preferred Base Network if one has
been defined (see Terminal Menu) or the home Base Network, or,
• a base station with better radio reception quality, or,
• the same base station if none of the above are available.
This function is available when the terminal is on standby, in a group
communication or waiting to enter a group communication.
The key on the CCP or the key on the pear shape micro is used
to end or refuse a call. This key is timed and must be pressed and held
down.
The key is used to send, at any time, an emergency call. This key
is timed and must be pressed and held down.
CLR
CLR
CCP MC2 V35 EN LB 17/10/01 14:12 Page 12