Installation Instructions

FIXED TERMINAL INSTALLATION HANDBOOK
E
N
G
L
I
S
H
21/42
This document is the property of MATRA NORTEL COMMUNICATIONS and should not be copied or circulated without permission
IH – PS8433EAE01 09/2001
2.4.5 External loudspeaker (optional)
The mobile terminal can use an external loudspeaker. The loudspeaker
can be supplied either by the manufacturer (see Section. 2.2.3) or locally.
If supplied locally, it must have the following characteristics:
• power : 15 W,
• impedance : 4 Ω.
The loudspeaker cable must be an audio screened or non–screened cable
with two wires. The cable is connected to the wall unit via the 2–pin STOKO
female connector included in the connection kit.
2.4.6 User Data Terminal (optional)
The User Data Terminal is a laptop PC.
The UDT cable must be a screened simple braided cable, RG250 type for
example. The cable is connected to the desktop as follows:
• via a Sub–D 9–pin male connector for a desktop set with handset,
• via the HG4280 cable for a desktop set with CCP.