Installation Instructions

MOBILE TERMINAL INSTALLATION HANDBOOK (BER VERSION B)
E
N
G
L
I
S
H
18/32 09/2001
IH – PS8432EAE01
This document is the property of MATRA NORTEL COMMUNICATIONS and should not be copied or circulated without permission
Cables should be secured along their route. Check that they will not be
pinched by other moving parts.
The bending radius of the car system cable should be at least 20 mm.
When securing the terminal, take account of the coaxial cable bending
which should comply with manufacturer standards.
Make sure that the transceiver can be easily inserted into its bracket.
CAUTION: In extreme operating conditions (high ambient temperature,
transmitting for a long period, BER fitted in a motor bike “Top
box”) the metal box of the BER may reach high temperatures.
The symbol below on the BER warns the user of the presence
of hot parts:
The user is thus advised to make sure that the BER has not
been subject to such extreme conditions before he uses the
BER. If it has been, the transmission should be turned off to
let the BER cool down.