Installation Instructions

MOBILE TERMINAL INSTALLATION HANDBOOK (BER VERSION B)
E
N
G
L
I
S
H
13/32
This document is the property of MATRA NORTEL COMMUNICATIONS and should not be copied or circulated without permission
IH – PS8432EAE01 09/2001
2.3 EQUIPMENT SUPPLIED LOCALLY
This section gives the characteristics of the equipment which can be
supplied locally.
Such equipment must comply with current standards and with the safety
precautions for vehicle equipment.
2.3.1 Antenna
The antenna is specific to each customer and must be specially adapted
to the frequency bands of the PMR system.
The characteristics of the antenna must be the following:
• permissible power : 20 W,
• SWR : < 1.5,
• impedance : 50 Ω,
• directivity : omni directional,
• gain : > 0 dB relative to ¼ wave whip.
2.3.2 Antenna cable
The antenna cable must be a coaxial screened double braided cable, type
RG214 for example.
The characteristics of the antenna cable must be the following:
• impedance : 50 Ω,
• cable loss : < 1 dB,
• connector : TNC male.