Wizard Ts130 QUICK START GUIDE
Wizard Ts130 Package included: QUICK START GUIDE 1 x Eachine Wizard TS130 frame kit 1 x TS 20A 4in1 Brushless ESC 4 x TS1507 4100KV brushless motor 1 x F4 flight controller 1 x FOXEER Arrow MICRO PRO camera 1 x 5.
Wizard Ts130 QUICK START GUIDE Contents 1.0 Frame kit----------------------------------------04 2.0 Motor----- ----------------------------------------04 3.0 Esc------------------------------------------------05 4.0 Flight controller---------------------------------05 5.0 Switchable VTX---------------------------------06-09 6.0 Camera-----------------------------------------------09 7.0 Motor Unlock/Lock------------------------------10 8.
Wizard Ts130 QUICK START GUIDE 1.0 Frame kit Wheelbase: 130mm Material: 3K carbon fiber Top plate thickness: 2mm Bottom plate thickness: 3mm Artist: hydrographics transfer printing 2.0 Motor Idle Current (Io/10V): 1.68A Lipo Cell: 3-4S Weight: 17.6g Max Continuous Current: 26A Max Continuous Power: 416W Max thrust: 626g(4S/3") Configu-ration: 9N/12P Motor Resistance (RM): 0.0495 Ω Stator Diameter: 15mm -4- Stator Thickness: 7mm Motor Diameter: 21.6mm Motor Body Length: 15.
Wizard Ts130 3.0 ESC Continuous current: 20A Peak current (5S): 25A Input voltage: 2-4S Supports Dshot600, Dshot300, Dshot150 Size: 27x27mm Weigjt: 3.3g 4.0 Flight controller CPU: f4STM32 F405 SCM Input voltage: 3-4S Sensor: MPU6000 SPI Built in OSD Built in 5V 2A BEC Size: 25x25mm Weight: 2.
Wizard Ts130 QUICK START GUIDE 5.0 Switchable VTX Input voltage: 7-24V Dimensions: 20x20mm Size: 27mm×27mm×4.5mm Adjustable 25mw / 100mw / 200mw Supports smart audio (remote OSD parameter adjustment) There are two ways to control the frequency and power of the launches: Enter the release: FEATURES->VTX SA can enter the following interface. <1> uses remote control to visualize control, as shown in Figure 1.1 Figure 1.1 The second row is the status bar, respectively.
Wizard Ts130 QUICK START GUIDE 5.0 Switchable VTX Seventh lines SET: Enter and select YES to confirm your BADN, CHAN, POWER settings and take effect immediately., as shown in Figure 1.2 below Figure 1.2 Eighth lines The CONFIG: function is set in, as shown in Figure 1.3 below. Figure 1.3 OP MODEL: mode adjustment, with free mode and race mode, needs reboot to take effect. FSEL MODE: regulates frequency setting mode, CHAN and user, user mode is temporarily invalid.
Wizard Ts130 QUICK START GUIDE 5.0 Switchable VTX In the POR mode, POR FREQ: can enter into any frequency between 5300-5900, as shown in Figure 1.4. Figure 1.4 STATX: status information <2> XMM-VTX is operated by a button with three LED lights (red light CH1-8; blue light BAND1-5; green light power 1-3 <25100-200 mW>)and TBS Smart Audio remote control operation.
Wizard Ts130 QUICK START GUIDE 5.0 Switchable VTX Note : In the remote control, the power of 25 corresponds to the actual 25 mW, 200 corresponds to the actual 100 mW, and 500/800 corresponds to the actual 200 mW. 6.0 Camera Solution: 1/3” Sony SUPER HAD II CCD+Nextchip 2040 DSP Pixel:PAL: 976(H) x 494(V);NTSC: 768(H)×494(V) TV System: PAL/NTSC (based on country) Resolution: 600TVL(color) 650TVL(B&W) Synchronization: internal Min. Illumination: 0.
Wizard Ts130 QUICK START GUIDE 7.0 Motor Unlock/lock Motor Unlock Put the throttle rocker at the lowest point, move the rudder rocker to the right and keep it for more than 2 seconds. The blue state indicator is always on, that is unlock the motor. Motor lock Put the throttle rocker at the lowest point, move the rudder rocker to the leftmost side, and the red state indicator is always turned on to lock the motor. At this time, pushing the throttle rocker motor upward will not rotate. 8.
