User manual

24
© 2006, Elektro-Automatik GmbH & Co. KG
Irrtümer und Änderungen vorbehalten
EN
© 2009, Elektro-Automatik GmbH & Co. KG
Table of contents
1. Introduction 25
2. Technicalspecications 2
5
2.1 Control panel and display 2
5
2.2 Technicalspecications 2
6
3. Device description 2
7
3.2 Scope of delivery 2
8
4. General 2
8
4.1 Prologue / Warning 2
8
4.2 Cooling 2
8
4.3 Opening the device 2
8
5. Installation 2
8
5.1 Visual check 2
8
5.2 Mains connection 2
8
5.3 DC output terminal 2
8
5.4 Terminal „Sense“ (Remote sense) 2
8
5.5 Interface card slot 2
8
6. Handling 2
8
6.1 The display 2
8
6.2 Pushbuttons on the control panel 2
9
6.3 Further control elements 3
1
6.4 Adjusting set values 3
1
7. Behaviour of the device when... 3
2
7.1 Switching on by power switch 3
2
7.2 Switching off by power switch 3
2
7.3 Switching to remote control 3
2
7.4 Overvoltage occurs 3
2
7.5 Overtemperature occurs 3
2
7.6 Voltage, current and power are regulated 3
3
7.7 Remote sense is active 3
3
7.8 Mains undervoltage or overvoltage occurs 3
3
7.9 Connecting different types of loads 3
3
8. Device setup 3
4
9. Digital interface cards 3
4
10. Analogue interface 3
4
10.1 General 3
4
10.2 Example applications 3
5
11. Miscellaneous 3
6
11.2 Functions of terminal System Bus 3
6
11.2.1 Series connection in Master-Slave mode 3
6
11.2.2 Parallel connection in Share Bus mode 3
6
11.3 Networking 3
7