User manual

23
© 2009, Elektro-Automatik GmbH & Co. KG
EN
General
About
User instruction manual for power supply series PS 8000 2U
Elektro-Automatik GmbH & Co. KG
Helmholtzstrasse 31-33
41747 Viersen
Germany
Phone: +(49) 02162 / 37850
Fax: +(49) 02162 / 16230
Web: www.elektroautomatik.de
Mail: [e-mail]
© 2009 Elektro-Automatik
Reprint, duplication or partly, wrong use of this user instruction
manual are prohibited and might be followed by legal conse-
quences.
Date: February, 2009
Safety instructions
• Only operate the device at a mains voltage as stipulated on
the type plate
• Never insert mechanical parts, especially from metal, through
the air ventilation slots
• Avoid any use of liquids of any kind in the proximity of the device,
they might get into it
• Do not connect voltage sources to the device which are able
to generate voltages higher than the nominal voltage of the
device
• In order to equip interface cards into the slot at the rear, the
common ESD provisions have to be followed
• The interface card may only be plugged and unplugged while
the unit is completely switched off (mains switch OFF)