Instructions

Page 12
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
PS 2000 B Single Series
Overview
For a detailed description of the display and its layout see section «1.9.4. The control panel (HMI)».
(1)
Power switch
Usedtopowerthedeviceonando󰀨.
(2)
Pushbutton “Settings”
UsedforaccesstothesetupmenuwhiletheDCoutputisswitchedo󰀨.
(3)
Color display
Used for display of set values, menus, actual values and status.
(4)
Rotary knob with push button function
Turn: adjustment of the voltage set value or selection of parameters in the menu
Push: selection of the decimal position (cursor) of the currently assigned value
(5)
USB port
Used to connect the device to a PC or other control hardware to establish communication and remote control
(6)
Rotary knob with push button function
Turn: adjustment of the current set value or adjustment of parameter value in the menu
Push: selection of the decimal position (cursor) of the currently assigned value
(7)
Pushbutton “On/O󰀨”
UsedtoswitchtheDCoutputoonoro󰀨,unlesstheHMIisfullylockedorremotecontrolisactive.Isalso
used to acknowledge, i. e. clear alarms before the DC output on again.
(8)
DC output connectors
Redandblacksafetysocketswhichallowfortheuseofspecic4mmsafetyplugs,plusa4mmPEsocket
which can be used to ground any of the output poles and/or external hardware.
(9)
Fan
Only present with 320 W models. The fan is used to cool the device by exhaustion of warm air out of the
rear. It’s temperature controlled.