Instructions

Page 21
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
PS 2000 B Single Series
3.4.3.1 Menu “Settings”
This menu is for all settings related to the DC output values:
Group Description
Presets Allows for adjustment of the set values of voltage and current, alternatively to the adjustment
in the main screen of the display.
Protection Allows for adjustment of protection thresholds (here: OVP, OCP). These are the same
values as shown in the main display page, but here they are adjustable. Also see section
«3.3. Alarm conditions»
Limits Allows for adjustment of limits for set values. Also see section «3.4.4. Adjustment limits»
3.4.3.2 Menu “About HW/SW...”
Thismenupagedisplaysanoverviewofdevicerelevantdatasuchasserialnumber,articlenumberandrmware
versions.
3.4.3.3 Menu “HMI Setup”
These settings refer exclusively to the control panel (HMI).
Element Description
Language Selection of the display language between German and English.
Default setting: English
Backlight The choice here is whether the backlight remains Always on or if it should be dimmed to
0% brightness when no input via push buttons or rotary knob is done for 60 s. As soon as
manual input is done, the backlight returns automatically. The setting doesn’t apply to re-
mote control, so the display could remain dark as long as the device is remotely controlled.
Default settings: Always on
Brightness Adjustment of the backlight brightness between 0% (almost black) and 100% (maximum,
clearly readable).
HMI Lock Setup See «3.4.7 Control panel (HMI) lock» on page 23.
Default settings: Lock all, No
Enable PIN Belongs to HMI Lock.ActivatesthePIN(personalidenticationnumber)whichhasbeen
set up with Change PIN.
Change PIN Belongs to HMI Lock. DeneaPINorchangeit.
Lock HMI? Locks the HMI when Yes has been selected and after leaving the setup menu.