User manual

Page 33
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
PS 3000 C Series
Parameters in curly brackets describe the selectable range, underlined parameters show the default value after delivery or reset.
MENU
Settings Overview
Page 1 Page 2
Enter
Output Settings U = I = P = Protection Settings OVP = OCP = OPP = Limit Settin gs
U-min = U-max = I-min = I-max =
P-max =
General Settings Reset device
Allow remote control: Yes | No DC output after Power ON: OFF | Restore DC output after PF alarm: OFF | AUTO DC output after remote: OFF | AUTO
Default profile User Profile 1 - 5
Profiles
Backlight
English, Deutsch, Русский, 中文
Language
Brightness: min...max Backlight: 60 sec. on | Always on
HMI Lock
HMI Lock: Lock all | ON/OFF possible Enable PIN: Yes | No Change PIN: Start
Status Page Layout 1 | Layout 2
HMI Setup
Analog interface Rem-SB: Normal | Inverted Analog Rem-SB action: DC OFF | DC ON/OFF Analog interface range: 0...5V | 0...10V
Page 3
Alarm Sound Alarm sound: ON|OFF Key Sound Key sound: ON|OFF