User manual

Page 44
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
EL 3000 B Series
If an attempt is made to alter something whilst the HMI is locked, a requester appears in the display asking if the
lock should be disabled.
► How to unlock the HMI
1. Turn one of the rotary knobs or press any button (except for “On/Off” when lock mode “ON/OFF possible”
has been set).
2. This request pop-up will appear: .
3. Unlock the HMI by pressing within 5 seconds, otherwise the pop-up will disappear and the HMI remains
locked. In case the additional PIN code lock has been activated in the menu “HMI Lock”, another requester
willpopup,askingyoutoenterthePINbeforeitnallyunlockstheHMI.
3.8 Loading and saving a user prole
The menu “Proles”servestoselectbetweenadefaultproleandupto5userproles.Aproleisacollectionof
allsettingsandsetvalues.Upondelivery,orafterareset,all6proleshavethesamesettingsandallsetvalues
are0.Iftheuserchangessettingsorsetstargetvaluesthenthesecreateaworkingprolewhichcanbesavedto
oneofthe5userproles.Theseprolesorthedefaultonecanthenbeswitched.Thedefaultproleisread-only.
Thepurposeofaproleistoloadasetofsetvalues,settingslimitsandmonitoringthresholdsquicklywithout
havingtoreadjustthese.AsallHMIsettingsaresavedintheprole,includinglanguage,aprolechangecanalso
be accompanied by a change in HMI language.
Oncallingupthemenupageandselectingaprolethemostimportantsettingscanbeseen,butnotchanged.
► How to save the current values and settings as a user prole
1. While the DC input is switched off, press button
2. Inthemenuusethearrowbuttons(↓,↑)tonavigateto“Pro-
les”, then press .
3. Intheselectionscreenselectoneoftheuserproles1-5submenusbyusingthearrowbuttons.
4. Inthesubmenuyoucanview,loadorsavetheprolebyselectingthecorrespondingentryandpressing .
5. Select“SavesettingsinProlex”andconrmwith .
Loadingaproleisdonethesameway.