User manual

Page 30
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Allemagne
Téléphone : +49 2162 / 3785-0
Fax : +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
Série EL 3000 B
MENU Settings
Overview
Page 1 Page 2 Page 4
Enter
Input Settings U = I = P = R= Protection Settings OVP = OCP = OPP = Limit Settings
U-min = U-max = I-min = I-max =
P-max = R-max =
General Settings Reset device
Allow remote control: Yes | No DC input after Power ON: OFF | Restore Voltage controller setting: Slow | Fast Enable R mode: Yes | No DC input after PF alarm: OFF | AUTO
Page 3
DC input after remote: OFF | AUTO
Default profile User Profile 1 - 5
Profiles
Analog interface Rem-SB: Normal | Inverted Analog Rem-SB action: DC OFF | DC ON/OFF Analog interface range: 0...5V | 0...10V
Page 5
Backlight
English, Deutsch, Русский, 中文
Language
Brightness: min...max Backlight: 60 sec. on | Always on
HMI Lock
HMI Lock: Lock all | ON/OFF possible Enable PIN: Yes | No Change PIN: Start
Status Page Layout 1 | Layout 2
HMI Setup
Alarm Sound Alarm sound: ON|OFF Key Sound Key sound: ON|OFF
Les paramètres entre parenthèses correspondent à la gamme sélectionnable, ceux soulignés indiquent la valeur par défaut (réinitialisation ou livraison).