Datasheet
79
Irrtümer und Änderungen vorbehalten / Subject to modication without notice, errors and omissions excepted
Alle Wertangaben sind typische Werte / All values are typical values
EA-PS 3000 B 160W - 650W
LABORNETZGERÄTE / LABORATORY POWER SUPPLIES
Fernfühlung (Sense)
Der serienmäßige Fernfühleingang kann direkt am Verbrau-
cher angeschlossen werden, um Spannungsabfall auf den
Lastleitungen zu kompensieren.
Anzeige- und Bedienelemente
Ausgangsspannung und Strom werden auf den dreistelligen
Anzeigen übersichtlich dargestellt. Die Betriebszustände
des Gerätes und der Tastatur werden über LEDs angezeigt,
was dem Anwender die Bedienung wesentlich erleichtert.
Mittels Potentiometern lassen sich Spannung, Strom und
OVP einstellen.
Voreinstellung der Ausgangswerte (Preset)
Um die Ausgangswerte einzustellen, ohne daß der Ausgang
aktiv ist, gibt es die Preset-Funktion.
Mit Hilfe dieser Funktion kann der Anwender die Ausgangs-
spannung, den Ausgangsstrom und den Überspannungs-
schutz (OVP) voreinstellen.
Analogschnittstelle
Die Analogschnittstelle auf der Frontseite des Gerätes ver-
fügt über analoge Steuereingänge und Monitorausgänge für
0...10V, um Spannung und Strom von 0...100% zu program-
mieren und auszulesen. Weiterhin gibt es Statuseingänge
und -ausgänge.
Optionen
• USB-Adapter EA-UTA12 (siehe Seite 60)
Remote sense
The sense input can be connected directly to the load to
compensate voltage drops along the high power leads.
Display and controls
Output voltage and output current are clearly represented on
two three-digit displays. The operation states of the equipment
and the press buttons will be indicated by LEDs, that makes
the operation essentially simpler for the user.
The adjustment for voltage, current and OVP is realised by
potentiometers.
Presetting of output values
To set output values without a direct effection to the output
condition, a preset function is implemented.
With this function the user can preset values for the output
voltage, output current and overvoltage protection (OVP).
Analogue Interface
The connection for the analogue interface is located on the
front of the device. Analogue inputs and outputs are available
here, for a voltage range of 0V...10V to set and monitor voltage
and current from 0...100%.
Furthermore, several inputs and outputs are available for
controlling and monitoring the equipment status.
Options
• USB adapter EA-UTA12 (see page 60)
Technische Daten Technical Data EA-PS 3016-10B EA-PS 3032-05B EA-PS 3065-03B EA-PS 3016-20B EA-PS 3032-10B
Eingangsspannung Input voltage 115/230V 115/230V 115/230V 115/230V 115/230V
-Frequenz -Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz
Ausgangsspannung (DC) Output voltage (DC) 0...16V 0...32V 0...65V 0...16V 0...32V
-Stabilität bei 0-100% Last -Stability at 0-100% load <10mV <10mV <10mV <10mV <8mV
-Stabilität bei ±10% ΔU
E
-Stability at ±10% ΔU
IN
<1mV
RMS
<1mV
RMS
<1mV
RMS
<5mV
RMS
<5mV
RMS
-Restwelligkeit -Ripple <2mV
RMS
<2mV
RMS
<2mV
RMS
<2mV
RMS
<2mV
RMS
-Ausregelung 10-100% Last -Regulation 10-100% load <1ms <1ms <1ms <1ms <1ms
-OVP-Einstellung -OVP adjustment 0...17,6V 0...35,2V 0...71,5V 0...17,6V 0...35,2V
Ausgangsstrom Output current 0...10A 0...5A 0...3A 0...20A 0...10A
-Stabilität bei 0-100% ΔU
A
-Stability at 0-100% ΔU
OUT
<4mA <4mA <4mA <4mA <4mA
Ausgangsleistung Output power 160W 160W 160W 320W 320W
Sicherheit Safety EN60950 EN60950 EN60950 EN60950 EN60950
Abmessungen (BxHxT) Dimensions (WxHxD) 240x120x300mm 240x120x300mm 240x120x300mm 240x120x300mm 240x120x300mm
Gewicht Weight 6,5kg 6,5kg 6,5kg 10kg 10kg
Artikelnummer Article No. 35320170 35320171 35320172 353201703 35320174
Technische Daten Technical Data EA-PS 3065-05B EA-PS 3016-40B EA-PS 3032-20B EA-PS 3065-10B EA-PS 3150-04B
Eingangsspannung Input voltage 115/230V 90...264V 90...264V 90...264V 90...264V
-Frequenz -Frequency 50/60Hz 45...65Hz 45...65Hz 45...65Hz 45...65Hz
Ausgangsspannung (DC) Output voltage (DC) 0...65V 0...16V 0...32V 0...65V 0...150V
-Stabilität bei 0-100% Last -Stability at 0-100% load <10mV <10mV <20mV <30mV <40mV
-Stabilität bei ±10% ΔU
E
-Stability at ±10% ΔU
IN
<5mV
RMS
<2mV
RMS
<2mV
RMS
<2mV
RMS
<30mV
RMS
-Restwelligkeit -Ripple <2mV
RMS
<10mV
RMS
<10mV
RMS
<10mV
RMS
<5mV
RMS
-Ausregelung 10-100% Last -Regulation 10-100% load <1ms <3ms <3ms <3ms <3ms
-OVP-Einstellung -OVP adjustment 0...71,5V 0...17,6V 0...35,2V 0...71,5V 0...165V
Ausgangsstrom Output current 0...5A 0...40A 0...20A 0...10A 0...4A
-Stabilität bei 0-100% ΔU
A
-Stability at 0-100% ΔU
OUT
<4mA <50mA <50mA <50mA <10mA
Ausgangsleistung Output power 325W 640W 640W 650W 640W
Sicherheit Safety EN60950 EN60950 EN60950 EN60950 EN60950
Abmessungen (BxHxT) Dimensions (WxHxD) 240x120x300mm 240x120x300mm 240x120x300mm 240x120x300mm 240x120x300mm
Gewicht Weight 10kg 5,5kg 5,5kg 5,5kg 5,5kg
Artikelnummer Article No. 35320175 35320176 35320177 35320178 35320179