User manual
Page 30
ELR/ELM 5000 Series
www.elektroautomatik.de
ea1974@elektroautomatik.de
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
Parameters in curly brackets describe the selectable range, underlined parameters show the default value after delivery or reset.
MENU
Setti ngs
Communication
Sequence Generator
Overview
About HW, SW...
Input Settings
Protection Settings
U = {00.00 ... 88.00} V
I = {00.000 ... 25.500} A
P = {0...326} W
Adr. sou rce: DHCP | Manu al
IP Address: 000.000.000.000 – 255.255.255.255
Subnet mask: 000.000.000.000 – 255.255.255.255
Gateway: 000.000.000.000 – 255.255.255.255
Limit Settings
OVP = {0...88.00} V
OCP = {0...27.500} A
OPP = {0...352} W
Page 1
General Settings
DC input after PF alarm: OFF | AUTO
U-min = {00.00...81.60} V
U-max = {00.00...81.60} V
I-min = {00.000...25.500} A
I-max = {00.000...25.500} A
P-max = {0...326} W
Page 2
HMI Setup
Allow remote control: Yes | No
DC input after power ON: OFF | Res tore
Res et device
IP Setting s 1
DNS Address: 000.000.000.000 – 255.255.255.255
Port: 0...65535
IP Setting s 2
Com Timeout
Timeout[s]: {5...65535}
Com Protocols
Acti vated: SCPI ModBus
View settings
Language
Backlight
HMI Lock
Firmware Update
Touch Panel Calibration
English | Deutsch
Always on: 60 sec. on: Brightness: 0..100%
ON/OFF possible: Yes |No
HMI | ETH-BL
Start
Input Settings
Limit Settings
Alarm History