Datasheet

Irrtümer und Änderungen vorbehalten / Subject to modication without notice, errors and omissions excepted
© EA-Elektro-Automatik GmbH & Co. KG, 2015
127
Leistungen, Spannungen, Ströme
Es stehen zwei Last-Modelle zur Auswahl. Eins mit 80 V Ein-
gangspannung und eins mit 200 V DC. Beide Modelle bieten
320 W Nennleistung, wobei das 80 V-Modell für 25 A Strom
ausgelegt ist und dann 200 V-Modell für 12 A. Durch die Er-
weiterbarkeit auf bis zu 10 Module in einem Rack kann die
Leistung auf 3200 W erhöht werden.
Bauform
Das Rack, das zur Aufnahme der Lastmodule
dient, hat 19“ Breite und 6 HE Höhe, bei 480 mm
Einbautiefe. Somit ist es ideal für die Verwen-
dung in 19“-Schränken unterschiedlicher Größe
geeignet.
Netzanschluß
Das Rack kann an einer normalen 16 A-Steckdose mit 230 V
AC (±10%) Netzspannung oder einer ähnlichen Versorgung
betrieben werden. Die Rückspeisefähigkeit
erfordert es dabei, daß im Netz genügend
Verbraucher vorhanden sind, um die zuge-
führte Energie rückspeisen zu können.
Netzseitig kann das Gerät mit einer optiona-
len Überwachungseinheit („ENS2“, siehe Seite 148), auch
Netz- und Anlagenschutz genannt, ausgerüstet werden, die
optional erhältlich, nachrüstbar und modular ist. Durch Verwen-
dung dieser Option wird der Netzanschluß immer dreiphasig
(L1, L2, L3, N, PE).
Netzrückspeisung
Bei diesen elektronischen Lasten dient der Netzeingang auch
immer zur Energierückspeisung der am DC-Eingang aufge-
nommenen Leistung, die mit einer Efzienz von durchschnitt-
lich 93% umgewandelt wird. Diese Art der Rückgewinnung
von Energie hilft Kosten zu sparen und vermeidet aufwendige
Kühlsysteme im Vergleich zu herkömmlichen Lasten, die ihre
Eingangsleistung in Wärme umwandeln.
Prinzipdarstellung:
Der Betrieb dieser Rückspeise-Lasten im Sinne einer Ener-
gieerzeugung am öffentlichen Stromnetz ist nicht vorgesehen.
Eine zusätzliche Überwachungseinheit mit Abschaltvorrichtung
(Netz-und Anlagenschutz, früher: ENS) kann optional installiert
werden, um beim sogenannten Inselbetrieb für zusätzlichen
Schutz von Personen und auch des lokalen Netzes zu dienen.
Unabhängig davon, ob der Anwender die Überwachungseinheit
installiert hat oder nicht, verfügen die Geräte über eine einfache
und nicht redundante Abschaltfunktion für den Fall einer Unter-
brechung der Netzzuleitung. Hierzu werden die Netzfrequenz
und die Netzspannung überwacht und bei Über- oder Unter-
schreitung von Grenzwerten eine automatische Abschaltung
der Wandlerstufe eingeleitet.
Power ratings, voltages, currents
There are two load models available. One for max. 80 V DC
input voltage and one for max. 200 V. Both models have a max.
power of 320 W, while the 80 V model can take up to 25 A and
the 200 V can take up to 12 A. By installing up to 10 units of
these load modules into a single rack it is possible to extend
the power to 3200 W max.
Construction
The rack, which is used to hold the load modules,
is designed with 19“ width and 6U height, while
having an installation depth of 480 mm. This
makes it ideal for use in 19“ cabinets of various
sizes.
Supply
The rack can be operated on a normal 230 V AC (±10%), 16 A
wall socket or a similar supply. The recovery feature requires
to always have sufcient devices on the grid
to consume the backfed energy.
The grid connection can be equipped with
a supervision unit “ENS2” (see page 148)
which is optionally available, retrottable and
modular.
With this option installed, the grid connection will always be
three-phase (L1, L2, L3, N, PE).
Energy recovery
The most important feature of these electronic loads is that the
AC input, i.e. grid connection, is also used as output for the
recovery of the supplied DC energy, which will be converted
with an efciency of approximately 93%. This way of energy
recovery helps to lower energy costs and avoids expensive
cooling systems, such as required for conventional electronic
loads which convert the DC input energy into heat.
Principle view:
Operation of these backfeeding loads in terms of power gen-
eration is not intended. There is an additional supervision unit
(automatic isolation unit, ENS) available for optional installation
and to achieve additional safety of persons and equipment,
especially when running the so-called isolated operation.
Regardless of whether the user has installed that supervision
unit or not, the devices feature a simple and non-redundant
switch-off function for the case of an interruption in the grid
connection cable. They supervise AC voltage and frequency
and will automatically switch off the inverter block in case upper
or lower limits are exceeded.
EA-ELR 5000 320 W - 3200 W
RÜCKSPEISENDE MEHRKANAL-DC-LAST / ENERGY RECOVERING MULTI CHANNEL DC LOAD