User manual

Page 16
ELR/ELM 5000 Series
www.elektroautomatik.de
[e-mail]
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
1.9.3 Scope of delivery
ELR 5000 rack:
1 x 19” 6U rack
1 x Mains cord (IEC, Schuko, 16 A)
1xUKwallsocketadapter(onlyincludedindeliverytotheUK)
1xSetofscrews(50pcs,forxationofloadmodulesordummyplates)
ELM 5000 load module:
1 x Electronic load device
1 x USB stick with documentation and software
1.9.4 Accessories
For these devices the following accessories are available:
Dummy plate for ELR 5000
FP ELM
Order number: 80433039
Retrottable,easyinstallabledummyplatesfortheunoccupiedloadmoduleslots
of the ELR 5000 rack. For personnel safety and better cooling air stream, it is
imperative to use these dummy plates in case the rack is not fully equipped with
ELM 5000 load modules.
Screwsforxingtheplatesontherackfrontareincludedwiththerack.
Caution!
For reasons of safety it is not allowed to operate the electronic load rack while the front is
not completely closed. In case the rack is not going to be fully equipped with load modules,
a corresponding number of dummy plates must be installed!