User manual

Page 14
ELR/ELM 5000 Series
www.elektroautomatik.de
[e-mail]
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
Figure 7 - Control Panel
Overview of the elements of the operating panel
For a detailed description see section „1.9.5. The control panel (HMI)“ and „1.9.5.2. Rotary knob“.
(1)
Touchscreen display
Used for selection of set values, menus, conditions and display of actual values and status.
Thetouchscreencanbeoperatedwiththengersorwithapen(stylus).
(2)
Rotary knob with push button function
Knob(turn):adjustingthevoltage,currentorpowersetvalues,orsettingtheparametervaluesinthemenu.
Knob(push):selectionofthedecimalpositiontobechanged(cursor)inthecurrentvalueselection.
(3)
On/Off Button for DC input
Used to toggle the DC input between on and off, also used to start a sequence run. The LED “ON” in the
display indicates the state of the DC input, no matter if the device is manually controlled or remotely.
(4)
USB-A port
For the connection of standard USB sticks up to 32GB, formatted to FAT32, to load or save the 100 sequences
forthesequencemanagercanbeloadedorsaved.Itisalsousedtoinstallrmwareupdates.
(5)
Ethernet port
Communication port for control and monitoring of the module. Uses HTTP (website) and standard TCP.