User manual
Page 29
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
ea1974@elektroautomatik.de
EL 9000 T Series
MENU Settings
Overview
Page 1
Page 2
Page 3
Page 5
Enter
Event U
Event I
Event P
UVD = { 0V...Umax }
Aсtion = { NONE | SIGNA L | WARNING |ALARM }
OVD = { 0V...Umax }
Action = { NONE | SIGNA L | WARNING |ALARM }
UCD = { 0A...Imax }
Action = { NONE | SIGNA L | WARNING |ALARM }
OCD = {0A...Imax }
Action = { NONE | SIGNA L | WARNING |ALARM }
OPD = { 0W...Pmax }
Action = { NONE | SIGNA L | WARNING |ALARM }
Page 4
Input Settings U = I = P =
Protection Settings OVP = OCP = OPP =
Limit Settin gs
U-min = U-max = I-min = I-max =
P-max =
General Settings
Reset device
Event Settings
Allow remote control: Yes | No
DC input after power ON: OFF | Restore
Analog interface Rem-SB: Normal | Inverted
Voltage controller setting: Slow | Fast
Enable R mode: Yes | No
DC input after PF alarm: OFF | AUTO
Analog Rem-SB action: DC OFF | DC ON/OFF
Analog interface range: 0...5V | 0...10V
Calibrate device ...
Parameters in curly brackets describe the selectable range, underlined parameters show the default value after delivery or reset.
Parameters in dotted boxes are related to optional components and may not be shown on the display.