User manual

Page 14
EL 9000 T Series
www.elektroautomatik.de
[e-mail]
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
Figure 5 - Control Panel
Overview of the elements of the operating panel
For a detailed description see section „1.9.5. The control
panel (HMI)“ and „1.9.5.2. Rotary knobs“.
(1)
Touchscreen display
Used for selection of set values, menus, condi-
tions and display of actual values and status.
Thetouchscreencanbeoperatedwiththengers
or with a stylus.
(2)
Rotary knob with push button function
Left knob (turn): adjusting the voltage, power or
resistance set values, or setting the parameter
values in the menu.
Left knob (push): selection of the decimal posi-
tion to be changed (cursor) in the current value
selection.
Right knob (turn): adjusting the current set value,
or setting parameter values in the menu.
Right knob (push): selection of the decimal posi-
tion to be changed (cursor) in the current value
selection.
(3)
On/Off Button for DC input
Used to toggle the DC input between on and
off, also used to start a function run. The LEDs
“On” and “Off” indicate the state of the DC input,
no matter if the device is manually controlled or
remotely
(4)
LED “Power”
Indicates different colours during the start of
the device and remains green for the period of
operation.
(5)
USB-A port
For the connection of standard USB sticks up
to 32GB, formatted to FAT32. The 100 arbitrary
function sequences can be loaded from or saved
to the stick, as well as it is used for data logging.