User manual

Page 42
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
EL 9000 B HP Series
IF Level 1 Level 2 Level 3 Description
Ethernet / ModBus-TCP, 1 & 2 Port
IP Settings DHCP The IF allows a DHCP server to allocate an IP address, a subnet
mask and a gateway. If no DHCP server is in the network then
networkparameterswillbesetasdenedinitem“Manual”
Manual IP This option is activated by default. An IP address can be manu-
ally allocated.
Gateway Here a gateway address can be allocated if required..
Subnet Hereasubnetmaskcanbedenedifthedefaultsubnetmask
is not suitable.
DNS 1
DNS 2
HeretheaddressesoftherstandsecondDomainNameServers
(DNS)canbedened,ifneeded.ADNSisonlynecessaryifthe
device has Internet access and should call Internet URLs, e.g.
an internal eMail system, in order to send an eMail.
Port Range: 0...65535. Default ports:
5025 = Modbus RTU (all Ethernet interfaces)
Reserved ports which must not be set with this parameter:
502 = Modbus TCP (Modbus-TCP interface only)
other typical reserved ports
IP Com
Settings P1
IP Com
Settings P2
AUTO Settings for the Ethernet port such as transmission speed are
set automatically.
Manual Half dup Manual selection for transmission speed (10MBit/100MBit) and
duplex mode (full/half). It is recommended to use the “AUTO”
option and only revert to “Manual” if these parameters fail.
Full dup
10MBit
100MBit
Host name Free choice of host name (default: Client)
Domain name Free choice of Domain (default: Workgroup)
TCP Keep-Alive Enable TCP keep-alive
IF Level 1 Level 2 Level 3 Description
Pronet/IO, 1 & 2 Port
IP Settings
DHCP The IF allows a DHCP server to allocate an IP address, a subnet
mask and a gateway. If no DHCP server is in the network then net-
workparameterswillbesetasdenedinpoint“Manual”
Manual IP This option is activated by default. An IP address can be manually
allocated.
Gateway Here a gateway address can be allocated if required..
Subnet Hereasubnetmaskcanbedenedifthedefaultsubnetmaskis
not suitable.
DNS 1
DNS 2
HeretheaddressesoftherstandsecondDomainNameServers
(DNS)canbedened,ifneeded.ADNSisonlynecessaryifthe
device has Internet access and should call Internet URLs, e.g. an
internal eMail system, in order to send an eMail.
Host name
Free choice of host name (default: Client)
Domain name
Free choice of Domain (default: Workgroup)
Function Tag
Stringinputboxforauser-denabletextwhichdescribesthePronetslavefunctiontag.
Max. length: 32 characters
Location Tag
Stringinputboxforauser-denabletextwhichdescribesthePronetslavelocationtag.
Max. length: 22 characters
Station Name
String input box for a user-denable textwhichdescribesthePronetstationname.
Max. length: 54 characters
Description
Stringinputboxforauser-denabletextwhichdescribestheProbusslave.
Max. length: 54 characters
Installation Date
Stringinputboxforauser-denabletextwhichdescribestheProbusslaveinstallation
date tag. Max. length: 40 characters