User manual

Page 17
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
EL 9000 B HP Series
1.8.5 Control elements
Figure 6 - Control Panel
Overview of the elements of the operating panel
For a detailed description see section „1.9.5. The control panel (HMI)“.
(1)
Touchscreen display
Used for selection of set values, menus, status and display of actual values and status
Thetouchscreencanbeoperatedwiththengersorwithapen(stylus)
(2)
Rotary knob with push button function
Left knob (turn): adjusting the voltage, power or resistance set values, or setting the parameter values in
the menu
Left knob (push): selection of the decimal position to be changed (cursor) in the current value selection
Right knob (turn): adjusting the current set value, or setting parameter values in the menu
Right knob (push): selection of the decimal position to be changed (cursor) in the current value selection
(3)
On/Off Button for DC input
Used to toggle the DC input between on and off, also used to start a function run. The LEDs “On” and “Off”
indicate the state of the DC input, no matter if the device is manually controlled or remotely
(4)
USB-A port
For the connection of standard USB sticks. See section „1.9.5.5. USB-Port (Front side)“ for more details