User manual
Page 13
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
ea1974@elektroautomatik.de
EL 9000 B HP Series
Up to 2400 W
Model HP
EL 9080-170 B EL 9200-70 B EL 9360-40 B EL 9500-30 B EL 9750-20 B
Analog interface
(1
Set value inputs U, I, P, R
Actual value output U, I
Control signals DC on/off, Remote on/off, R mode on/off
Status signals CV, OVP, OT
Galvanic isolation to the device max. 1500 V DC
Sample rate (set value inputs) 500 Hz
Insulation
Input (DC) to enclosure
DC minus: permanent max. ±400 V
DCplus:permanentmax.±400V+max.inputvoltage
Input (AC) to input (DC) Max. 2500 V, short-term
Environment
Cooling Temperature controlled fans
Ambient temperature 0..50 °C
Storage temperature -20...70 °C
Digital interfaces
Featured 1x USB-B for communication, 1x USB-A for functions, 1x Master-slave bus
Slot for digital modules CAN,CANopen,Probus,Pronet,RS232,Ethernet,ModBusTCP,EtherCAT
Galvanic isolation to the device max. 1500 V DC
Terminals
Rear side
Share Bus, DC input, AC input, remote sensing, analog interface, USB-B, master-slave
bus, interface module slot
Front side USB-A
Dimensions
Enclosure (WxHxD) 19“ x 2U x 464 mm
Total (WxHxD) 483 mm x 88 mm x 538 mm
Standards EN 60950
Weight ~ 11 kg ~ 11 kg ~ 11 kg ~ 11 kg ~ 11 kg
Article number 33200705 33200706 33200707 33200708 33200709
(1Fortechnicalspecicationsoftheanaloginterfacesee„3.5.4.4 Analog interface specication“ on page 51