User manual

Doc-ID: EAPCEN Page 21
Date: 16.12.2015
12. App „Multi Control“
Figure 12 - Multi Control main view
Since version 1.52 of EA Power Control the app “Multi Control” is featured. After the first installation of this version, the
app is locked and hidden. To unlock it, an optionally purchasable license has to be installed. For more information about
getting a license and unlocking the app refer to “11. License Management”.
This app can be used to control and monitor up to 20 devices of identical or different model and type at once and in one
window. All devices recognised by EA Power Control are listed in this window to access them for remote control without
the need to switch to app “Terminal”. The device list can be managed by deleting devices from it resp. insert them again,
as long as they are still connected to the PC.
12.1 Limitations
 The app can manage, access and control up to 20 devices. In case a higher number is directly connected to
the PC or accessible via a network, a rule applies to first list USB devices according to their incrementing
COM port number, then list Ethernet devices according to their incrementing IP
 Sequencing can only be done in one instance and only for the selected devices
 Logging is not available
 Devices to which the connection has been lost cannot be inserted automatically into the device list again
 A configuration via app “Settings” cannot be written to multiple devices at once