User manual

Doc-ID: EAPCEN Page 14
Date: 16.12.2015
8.1.1 Settings for Sequencing
Note: the settings for sequencing are per device. It means, the software distinguished devices by their serial number
and restores the settings after the next start.
Figure 9
Element
Description
Sequence file path
The button with the folder icon opens a dialog to select a sequence file of type CSV,
which must contain data in a certain format, as explained below. By default, an example
sequence file is given here.
Default selection: example_sequence_file.csv
Sequence file name
Separately shows the name of the sequence file
Sequencing with repetition
Enables repetition of the entire sequence after it has been completely processed. You
can set a certain number of extra rounds. Range: 1…65500. The additional option “Infi-
nite loop” will repeat the sequence infinitely, until manually stopped or due to a device
alarm.
Default setting: both disabled
Edit sequence file
Tries to start the application (if there is any) which is assigned to open CSV files, in order
to open the sequence file in edit mode. It is required to save the changes and close the
file in the external application to be able to use the file for Sequencing.