User manual

29
© 2007, Elektro-Automatik GmbH & Co. KG
EN
Important!
• Only equip the interface card(s) in units which are designed
to be used with them! It is not required to open the unit. In-
formation about which devices are capable of running these
interface cards can be requested from your local dealer or
read in the user instruction manual of the devices.
• Only equip the interface card(s) while the unit is switched
off by the mains switch!
• Units featuring two slots might be equipped with two cards,
but you can’t combine them arbitrarily. For detailed infor-
mation see section „3.3 Combination of interface cards“
• Never remove the covers from the cards!
• If only one card is equipped in units with two slots it is
recommended to install the default slot cover to the open
slot. This protects the unit from additional dust pollution and
ensures correct air circulation with the internal fans.
• Use and follow the common ESD provisions when installing
and removing the interface cards!
About & Copyright
User instruction manual for interface cards
Elektro-Automatik GmbH & Co. KG
Helmholtzstrasse 31-33
41747 Viersen
Germany
Phone: [phone] / 37850
Fax: [phone] / 16230
Web: www.elektroautomatik.de
Mail: [e-mail]
© 2007 Elektro-Automatik
Reprint, duplication or partly, wrong use of this user instruc-
tion manual are prohibited and might be followed by legal
consequences.
Date: May, 2007