Datasheet

86
Irrtümer und Änderungen vorbehalten / Subject to modication without notice, errors and omissions excepted
Alle Wertangaben sind typische Werte / All values are typical values
EA-PSI 800 R 320W - 5000W
PROGRAMMIERBARE EINBAUNETZGERÄTE / PROGRAMMABLE BUILT-IN POWER SUPPLIES
Weiteingangsbereich 90...264V (Modelle bis 1,5kW)
Zweiphaseneingang 340...460V (5kW-Modelle)
Hoher Wirkungsgrad bis 95.5%
Ausgangsleistungen: 320W bis 0...5000W
Ausgangsspannungen: 0...16V bis 0...500V
Ausgangsströme: 0...4A bis 0...170A
Flexible, leistungsgeregelte Ausgangsstufe**
Überspannungsschutz (OVP)
Übertemperaturschutz (OT)
Grasches Display für alle Werte und Funktionen
Fernfühleingang mit automatischer Erkennung
Analoge Schnittstelle für 0...10V oder 0...5V
Alarmmanagement
Natürliche Konvektion zur Kühlung*
Temperaturgeregelte Lüfter zur Kühlung**
Diverse Optionen
Wide range input 90...264V (up to 1.5kW models)
Two-phase input 340...460V (5kW models)
High efciency up to 95.5%
Output power ratings: 320W up to 0...5000W
Output voltages: 0...16V up to 0...500V
Output currents: 0...4A up to 0...170A
Auto-ranging output stage**
Overvoltage protection (OVP)
Overtemperature protection (OT)
Graphic display for all values and functions
Remote sense with automatic detection
Analogue interface for 0...10V or 0...5V
Alarm management
Natural convection for cooling*
Temperature controlled fans for cooling**
Various options
Allgemeines
Die mikroprozessorgesteuerten Einbaunetzgeräte der Serie
EA-PSI 800 R bieten viele Funktionen und Features bereits
serienmäßig, die das Arbeiten mit diesen Geräten erheblich
erleichtern.
Eingang
Die Geräte besitzen alle eine aktive PFC und sind für den
weltweiten Einsatz mit einem Netzeingang von 90...264V
AC ausgelegt (Modelle bis 1,5kW) oder benötigen einen
Zweiphasenanschluß mit 340...460V (5kW-Modelle).
Leistung
Geräte ab 1kW haben eine flexible, leistungsgeregelte
Ausgangsstufe, die bei hoher Ausgangsspannung den Strom
oder bei hohem Ausgangsstrom die Spannung so reduziert,
daß die maximale Ausgangsleistung nicht überschritten wird.
General
The microprocessor controlled chassis mounting power-sup-
plies from series EA-PSI 800 R have a multitude of functions
and features making the use of this equipment easier and
more effective.
Input
The equipment uses an active PFC and are suitable for
worldwide operation on mains supply of 90...264V (models
up to 1.5kW) or require a two-phase input with 340...460V
AC (5kW models).
Power
All models are equipped with a exible autoranging output
stage which provides a higher output voltage at lower output
current, or a higher output current at lower output voltage,
always limited to the max. nominal output power.
320W/640W Version
* Models up to 650W
** Models from 1kW
* Modelle bis 650W
** Modelle ab 1kW

Summary of content (4 pages)