User manual

Irrtümer und Änderungen vorbehalten

Using the power supply

7. Deviceconguration

Part 1: The menu Prole

This is an overview of the parameter pages, starting from the

menu Prole. The red colored menu is only displayed if the

option „internal resistance“ is unlocked.

+Prole+

Theprolesareintendedtominimizetotimeneededtosetup

thedeviceatalternatingusersortokeepuserdenedsettings

forrepeatingapplications.Thelastusedproleisalwaysloaded

after the unit is switched on.

The menu entry Prole leads you to following selection:

General settings

Supervision

Loadprole

Saveprole

General settings +

The menu entry General settings leads to following selection

where the operation mode, the display itself and the handling

(adjustment)oftheunitcanbecongured:

Setup operation mode

Preset list

Adjust limits

Control panel

Display

Supervision +

The menu entry Supervision leads to following selection

where alarms, warnings and signals, as well as the corresponding

supervision limits and reaction times are set up.

Alarm manager

U thresholds

I thresholds

Step response

Loadprole+

 Loadprolefromuserprole={default,1..4}

Thecurrentprolisreplacedbytheselectedone.

Saveprole+

 Saveproletouserprole={1..4}

Thecurrentprolecanbestoredintooneoutoffourproles.