User manual

Safety instructions

Dangerous voltage

Caution: The output voltage can rise to dangerous levels (>

60 VDC)!

All live parts have to be covered. All actions at the output ter-

minals have to be done while the unit is switched off from the

mains (mains switch OFF) and may only be executed by person-

nel which is instructed about the hazards of electrical current.

Any connection between the load and the unit (at the output

terminals) have to be scoop-proof. Applications connected to

thepoweroutputmustbeconguredandfusedinawaythat

prevents the use of these to cause a damage or worse to the

unit by overload or malfunction.

Important! Keep in mind!

• Only operate the unit at the voltage stipulated on the type

plate

• Never insert mechanical parts, especially from metal, into the

unit, there is risk of an electrical shock and the unit might get

damaged

• Avoid the use or presence of liquids in the proximity of the

unit, the liquid might get into the unit and cause damage

• Never touch the contacts of the mains plug at the mains cord

directly after unplugging it from the mains socket, because

there is risk of an electrical shock

• Never connect loads, especially ones with low resistance,

to the unit while the power output is switched on, because it

can cause sparks which might damage the unit and injure the

hands

• In order to equip interface cards into the slots on rear, the

common ESD regulations have to be followed

• The interface card may only be plugged and unplugged while

the unit is completely switched off (mains switch OFF)

General

About

User instruction manual for power supply series PSI 8000 DT

Elektro-Automatik GmbH & Co. KG

Helmholtzstrasse 31-33

41747 Viersen

Germany

Phone: +(49) 02162 / 37850

Fax: +(49) 02162 / 16230

Web: www.elektroautomatik.de

Mail: ea1974@elektroautomatik.de

Reprint, duplication or partly, wrong use of this user instruction

manual are prohibited and might be followed by legal conse-

quences.

Date: March 2009