User manual

Irrtümer und Änderungen vorbehalten

10.5 Accessories and options

Note: Details about options and accessories are avaible in se-

perate user guides.

Following accessories are optionally available:

a) USB-to-Analogue interface UTA12

Galvanically isolated remote control via USB (on PC side) and

the device internal analogue interface.

b) Digital interface cards

Pluggableandretrottable,digitalinterfacecardsforUSB,RS232,

CAN, GPIB/IEEE (SCPI only) or Ethernet/LAN (SCPI via VXI11)

are available.

Following options are available:

a) High Speed Ramping (models from 1kW)

Increased dynamics of the output voltage by reduced output

capacity. It must be pointed out, that other output related values

also increase!

Note: this is a permanent modication which is not switchable.

b) Internal resistance regulation

This option can be purchased subsequently and is unlocked with

a code number in the device‘s setup menu.

After it is unlocked, the user can choose between U/I/P or U/I/R

operation. The power set value will not be adjustable in U/I/R

mode,itisthenonlydenedasalimitinthedevicesettings.

Note: it will eventually be required to update the device rmware

before the option can be unlocked. Ask your supplier!

Using the power supply