Instructions

Page 32
PS 9000 1U Series
www.elektroautomatik.de
[e-mail]
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
MENU Settings
Overview Profiles About HW, SW
U = ____V I = ____A P = ____W
Default Prof. User Prof. 1...5 Output
Allow remote control: Yes | No Analog interface range: 0...5V | 0...10V Analog interface Rem-SB: Normal | Inverted Analog Rem-SB action: DC OFF | DC ON/OFF DC output after Power ON: OFF | Restore DC output after PF alarm: OFF | AUTO Share Bus mode: Slave | Master
Protection OVP = ____V OCP = ____A O PP = ____W Limits
U-min = ____V U-max = ____V I-min = ____A I-max = ____A
P-max = ____W
General Calibration Reset
Commu nicatio n
IP Settings 2
HMI Setup
Language: English|Deutsch
Display Language
Brightness: 1...10
HMI Lock
HMI lock: Lock all | ON/OFF possible Enable PIN: Yes | No Change user PIN: START
Key Sound Key sound: ON|OFF Alarm Sound Alarm sound: ON|OFF Page Setup View mode: UI | UP
IP Settings 1
Get IP address: Manual | DHCP IP address: 0.0.0.0 ... 255.255.255.255
Subnet mask: 0.0.0.0 ... 255.255.255.255 Gateway: 0.0.0.0 ... 255.255.255.255
Port: 0...65535
DNS address: 0.0.0.0 ... 255.255.255.255
Com Timeout Com Proto. View settings
Timeout USB (ms): 5...65535 Timeout ETH (s): 5...65535 Enabled: SCPI only | ModBus only | SCPI&ModBus
Underlined parameters show the default value after delivery or reset.