Instructions

Page 71
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
PS 9000 3U Series
4.3.3.3 Calibrating the actual values
Actual values of output voltage (with and without remote sensing) and output current are calibrated almost the
same way as the set values, but here you don’t need to enter anything, just conrm the displayed values. Please
proceed the above steps and instead of “Calibrate output value” select “Calibrate actual value” in the submenus.
After the device shows measured values on display, wait at least 2s for measured value to settle and then simply
conrm with , until you are through all steps.
4.3.3.4 Save calibration data
After calibration you may furthermore enter the current date. To do so, navigate to menu item “Calibration date”
and enter the date in format YYYY / MM / DD and submit with .
Last but not least save the calibration data permanently conrming menu item “Save and exit” with .
Leaving the calibration selection menu without saving via “Save and exit” will discard calibra-
tion data and the procedure would have to be repeated!
5. Contact and support
5.1 Repairs
Repairs, if not otherwise arranged between supplier and customer, will be carried out by the manufacturer. For this
the device must generally be returned to the manufacturer. No RMA number is needed. It is su󰀩cient to package
the equipment adequately and send it, together with a detailed description of the fault and, if still under guarantee,
a copy of the invoice, to the address below.
5.2 Contact options
Questions or problems with operation of the device, use of optional components, with the documentation or soft-
ware, can be addressed to technical support either by telephone or e-Mail.
Address e-Mail Telephone
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37
41747 Viersen
Germany
Technical support:
[e-mail]
All other topics:
[e-mail]
Switchboard: +49 2162 / 37850
Support: +49 2162 / 378566