Instructions

Page 52
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
PS 9000 3U Series
Screen “View settings”
This screen lists an overview of all active network and Ethernet port related settings and parameters, the status
of DHCP, the MAC address and also the domain and host name, which can’t be set in the device’s setup menu.
3.4.3.7 Menu “HMI Setup”
These settings refer exclusively to the control panel (HMI) and the display. The table lists all available settings for
the HMI, no matter in which sub menu they can be found.
Element Description
Language Selection of the display language between German, English, Russian or Chinese.
Default setting: English
Backlight The choice here is whether the backlight remains permanently on or if it should be switched
o󰀨 when no input via push buttons or rotary knob is done for 60 s. As soon as input is done,
the backlight returns automatically. Furthermore the backlight intensity can be adjusted here.
Default settings: 100, Always on
Status page Switches to a di󰀨erent main screen layout. The user can select between two layouts which
are depicted by small graphics as a preview. Also see section „3.4.6. Switching the main
screen view“.
Default setting: Layout 1
Key Sound Activates or deactivates sounds when pressing a button on the HMI. It can usefully signal
that the action has been accepted.
Default setting: o󰀨
Alarm Sound Activates or deactivates the additional acoustic signal of an alarm or user dened event
which has been set to “Action = ALARM”. See also „3.6. Alarms and monitoring“.
Default setting: o󰀨
HMI Lock Activates the HMI lock. See „3.7. Control panel (HMI) lock“ for details
Default settings: Lock all, No