Data Sheet
Irrtümer und Änderungen vorbehalten / Subject to modication without notice, errors and omissions excepted
© EA-Elektro-Automatik GmbH, 2013
53
EA-PS 9000 3U 3.3KW - 150KW
HOCHLEISTUNGS-DC-LABORNETZGERÄTE / HEAVY DUTY LABORATORY DC POWER SUPPLIES
Technische Daten Technical Data Serie / Series EA-PS 9000 3U
Eingang AC Input AC
- Spannung standard - Voltage standard 340...460V, 2ph/3ph
- Frequenz - Frequency 45...65Hz
- Leistungsfaktor - Power factor >0.99
Ausgang: Spannung DC Output: Voltage DC
- Genauigkeit - Accuracy <0.1%
- Stabilität bei 0-100% Last - Stability at 0-100% load <0.05%
- Stabilität bei ±10% ∆ U
E
- Stability at ±10% ΔU
IN
<0.02%
- Ausregelung 10-100% Last - Regulation 10-100% load <2ms
- Anstiegszeit 10-90% - Slew rate 10-90% max. 30ms
- Überspannungsschutz - Overvoltage protection einstellbar, 0...110% U
nenn
/ adjustable, 0...110% U
nom
- Entladezeit (Leerlauf) bei DC = aus - No load discharge time on DC off 100% U auf / to <60V: weniger als 10s / less than 10s
Ausgang: Strom Output: Current
- Genauigkeit - Accuracy <0.2%
- Stabilität bei 0-100% ∆ U
A
- Stability at 0-100% ΔU
OUT
<0.15%
- Stabilität bei ±10% ∆ U
E
- Stability at ±10% ΔU
IN
<0.05%
Ausgangsleistung Output power
- Genauigkeit - Accuracy <1%
Überspannungskategorie Overvoltage category 2
Schutzvorrichtungen Protection OTP, OVP, OPP, PF, OCP
(2
Spannungsfestigkeit Isolation
- Eingang zu Gehäuse - Input to enclosure 2500V DC
- Eingang zu Ausgang - Input to output 2500V DC
- Ausgang zu Gehäuse - Output to enclosure Max. 400V am DC- gegen PE / Max. 400V on DC- against PE
Verschmutzungsgrad Pollution degree 2
Schutzklasse Protection class 1
Analoge Schnittstelle Analog interface Eingebaut, 15-polige Sub-D-Buchse / Built in, 15-pole D-Sub, female
- Eingangsbereich - Input range 0...5V oder / or 0...10V (umschaltbar / switchable)
- Genauigkeit U / I - Accuracy U / I 0...10V: <0.2% 0...5V: <0.4%
- Programmierauflösung - Programming resolution Siehe Tabellen unten / See tables below
Reihenschaltung Series operation
möglich (bei max. Anhebung eines neg. Ausgangs auf 400V DC gegenüber PE) /
possible (max. potential of any minus DC output: 400V DC against PE)
- Master-Slave - Master-Slave nein / no
Parallelschaltung Parallel operation
Möglich, über Share-Bus-Betrieb oder analoge Schnittstelle /
Possible, via Share Bus operation or via analog interface
- Master-Slave - Master-Slave nein / no
Normen Standards
EN 61326, IEC 1010, EN 61010
EMV TÜV-geprüft nach / EMC TÜV approved according to
IEC 61000-6-2:2005
IEC 61000-6-3:2006 Class B
Kühlung Cooling
Lüfter, optional: Wasser
/ Fan, optional: water
Betriebstemperatur Operation temperature 0...50°C
Lagertemperatur Storage temperature -20...70°C
Relative Luftfeuchtigkeit Relative humidity <80%, n.c.
Betriebshöhe Operation altitude <2000m
Abmessungen (B H T)
(1
Dimensions (W H D)
(1
19“ 3HE/3U 609mm
(1 Nur Gehäuse, nicht über alles / Enclosure only, not overall
(2 Siehe Seite 153 / See page 153