User's Manual

©e2v technologies (uk) limited 2010 107553 09 Aug 2010 DAS762156AA (UK) Version 11, page 35
If a camera is connected by
wireless or through a wired
connection, video will then
appear in the Ateme Player
window and start playing
automatically.
If no video appears, then study
the FAQ section to investigate
the problem further.
The desktop icon may be modified to run a given camera address with a single click. Several icons
may be created, allowing one for each camera, for example.
1. Right-click the short cut for the ATEME player and select properties.
2. The TARGET box should contain a string like "C:\Program Files\ATEME\Ateme Player\Ateme
Player.exe"
3. Append the following; rtsp://nnn.nnn.nnn.nnn:554/tic04 /fullscreen /retry to the string with an
appropriate camera IP address. There is a space between tic04 and /fullscreen and between that
and /retry
4. The complete string would be as follows:
"C:\Program Files\ATEME\Ateme Player\Ateme Player.exe" rtsp://10.133.1.20:554/tic04 /fullscreen
/retry
for a camera with the default IP address 10.133.1.20
5. Change the setting in the RUN box to maximized.
6. Click Apply followed by OK.
Omit ‘fullscreen’ and ‘maximized’ commands if desired.