User's Manual

©e2v technologies (uk) limited 2010 107553 09 Aug 2010 DAS762156AA (UK) Version 11, page 34
SECTION 9 - Ateme Player Installation
Ateme Player Installation
The Ateme player software is supplied to allow viewing of the camera digital video data stream on
a PC. The software is pre-installed on the P7030RRS. Installation is only necessary on user-
supplied PCs or where a different configuration is desired.
Run setup.exe from the Ateme folder on the CD supplied.
Follow the instructions in the readme.txt file to register the software to remove the logo from the
player.
Ateme Player First Use and Set-Up
Once the installation has been
successfully completed,
double-click on the Ateme icon
and run the player.
Run Ateme Player either via
the icon on the Desktop or
from the Start menu.
Select ‘Open URL’ from the
File drop down menu and enter
rtsp://10.133.1.20:554/tic04
into the dialogue box.
Ensure that the “Retry upon
failure” box is ticked and then
click OK.
The URL given is for a camera
with the default settings. If the
camera IP address has been
changed for any reason, enter
the actual camera address
instead of 10.133.1.20
To use the player to play back
a recorded file from the video
capture battery pack, simply
choose ‘Open File...’ and
select the file required.