User's Manual

©e2v technologies (uk) limited 2010 107553 09 Aug 2010 DAS762156AA (UK) Version 11, page 19
INSTRUCTIONS FOR USE
Powering a Camera
Fit the battery substitute unit to the
camera as shown below and click into
place. Plug the cable into to the junction
box and camera.
Plug the DC power lead into a suitable
outlet, and switch on if necessary. The
camera will now turn on and a picture will
be seen on the display. The camera is
controlled by the power applied to it; the
power switch does not control the camera
when it is being powered externally.
Sending Video from a Camera
Video output from the camera must be
started either by a long push on the right-
hand button or remotely via the customer
software. Alternatively, the camera may
be set always to turn on with output video
sending as described in FAQ 1. When the
camera is sending video the ‘transmit’
icon is shown on the camera, circled in
red on the image.