User`s manual
FULL GO Mode:
FULL GO function allows continuous cleaning of your home. Whenever your robot vacuum
cleaner is fully charged, it will restart automatically to make a new cleaning mission.
Pressing the FULL GO button of your charging station to activate this function. Press this key
again to Stop this function.
When the robot is fully charged but a weekly schedule was previously edited, then the FULL GO
function will be activated in priority.
C. FORCED-CHARGING OPERATION OF THE VACUUM ROBOT
In the case where the robot vacuum cleaner batteries are very low (not used for long time, stuck under
furniture...) it may happen that the robot can no longer be recharged on its charging station dock or manually.
You can then use the “forced-charging” option of your vacuum cleaner.
Place the vacuum cleaner robot on its charging dock and put it ON. Ensure that both, station and the robot
are well connected through their charging contactors.
Press the key on the charging station. The screen of your vacuum cleaner robot should turn ON. It is
recommened to fully charge your unit before its next cleaning mission.
D. MANUAL CHARGING
You can directly charge the cleaner with its power adapter or with the charging dock station.
When charging directly via the power adaptor, please connect the output plug of the adapter within
the charging socket of the robot.
When charging with the charging dock station, please first connect the adapter to it, and then place
the cleaner tightly against the dock station to ensure a nice contact between the charging contactors
of the cleaner and the charging terminal on the dock station.
During the charging process, the screen of the robot will display the charging status.
Once the robot is fully charged, the READY led will light-on.
E. CLEANING ROBOT CHARGING TIME
e.ziclean® VAC 100 cleaning robot will automatically start to search its charging dock station once
its battery level is lower than 15%
Press the DOCK button on the robot's screen or from its remote control to enable self-charging
function.
When the cleaning robot is being charged, it will not work when you press any button unless your
pull it out from its dock station.
A full charging time is about 3 hours. It is recommanded to charge your robot for about 12 hours
during its very first charging times.