Product Manual

A Fold up the fabric top corner to expose the
Auto Slider
®
Pull Pin.
B Lift shelter corner slightly off the ground and engage
the Auto Slider
®
Pull Pin by pushing up on the
frame trusses with one hand while holding down the
top of the frame leg with the other hand. The pins
will auto-engage when aligned with the holes on
the frame legs.
C After the Auto Slider
®
Pull Pin has locked into place,
pull the fabric top down over the frame leg,
making sure to align and secure the hook and
loop strips on the fabric top to the frame.
D Repeat on all remaining corners.
SETUP
SECURE AUTO SLIDER
®
PULL PIN
4
A With a partner, lift the two adjacent outer
legs up off the ground simultaneously to
about waist height.
B Slide the lower/inner legs out until the leg
adjustment toggle buttons lock at selected
height on each leg. There are 3 adjustment
settings for each leg.
C Repeat on the remaining legs.
Note: It is recommended that you use genuine E-Z UP
®
Deluxe Weight Bags and/or heavy-duty Stake Kits to
secure your Instant Shelter
®
product.
EXTEND SHELTER LEGS
SETUP
5
Your E-Z UP
®
shelter setup
is now complete!