OWNER’S GUIDE TERRAIN 1000 72V TERRAIN 1000 72V CE 639050 ISSUED JUNE 2014
WELCOME Thank you for purchasing this vehicle. Before driving the vehicle, we ask you to spend some time reading this Owner’s Guide. This guide contains the information that will assist you in maintaining this highly reliable vehicle. Some illustrations may show items that are optional for your vehicle. This guide covers the operation of several vehicles; therefore, some illustrations may not represent your vehicle. Physical differences in controls will be illustrated.
OWNER’S GUIDE 72 VOLT ELECTRIC POWERED VEHICLE TERRAIN 1000 72V TERRAIN 1000 72V CE STARTING MODEL YEAR 2014 CALIFORNIA Proposition 65 Warning WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and brith defects or other reproductive harm.
FORWARD This vehicle has been designed and manufactured in the United States of America (USA). The Standards and Specifications listed in the following text originate in the USA unless otherwise indicated. The use of non-Original Equipment Manufacturer (OEM) approved parts may void the warranty. Failure to properly maintain batteries may void the warranty. Refer to the battery manaul for instructions on the proper maintenance and care of the batteries.
FORWARD This vehicle has been designed and manufactured in the United States of America (USA). The Standards and Specifications listed in the following text originate in the USA unless otherwise indicated. The use of non-Original Equipment Manufacturer (OEM) approved parts may void the warranty. Failure to properly maintain batteries may void the warranty. Refer to the battery manaul for instructions on the proper maintenance and care of the batteries.
TABLE OF CONTENTS SAFETY B GENERAL ......................................................................................................................... 1 NOTICES, CAUTIONS, WARNINGS, AND DANGERS ................................................... 1 GENERAL OPERATION................................................................................................... 3 MAINTENANCE ................................................................................................................
TABLE OF CONTENTS B 12 Volt Outlet ...................................................................................................... 16 Weather Enclosure (If Equipped)........................................................................ 16 OPERATING PROCEDURES BEFORE INITIAL USE..................................................................................................... 19 Recommended Tire Pressures ...........................................................................20 CHARGER ....
TABLE OF CONTENTS Battery Disposal ................................................................................................. 33 B LIFTING THE VEHICLE.................................................................................................. 33 WHEELS AND TIRES..................................................................................................... 34 Tire Repair .........................................................................................................
TABLE OF CONTENTS B Troubleshooting ..................................................................................................48 Hydrometer .........................................................................................................48 PERIODIC SERVICE SCHEDULE PERIODIC SERVICE SCHEDULE .................................................................................. 51 APPENDIX A DELTA-Q USER’S GUIDE...................................................................................
SAFETY Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. SAFETY GENERAL For any questions on material contained in this manual, contact an authorized representative for clarification. Read all labels located on the vehicle. Always replace any damaged or missing labels. On steep hills it is possible for vehicles to coast at greater speeds.
SAFETY Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. This manual has been designed to assist in maintaining the vehicle in accordance with procedures developed by the manufacturer. Adherence to these procedures and troubleshooting tips will ensure the best possible service from the product.
SAFETY Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. Never modify the vehicle in any way that will alter the weight distribution of the vehicle, decrease its stability, or increase the speed or extend the stopping distance beyond the factory specification. E-Z-GO prohibits and disclaims responsibility for all such modifications which would adversely affect the safety of the vehicle.
SAFETY Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. Before working on the vehicle, remove all jewelry. Be sure no loose clothing or hair can contact moving parts. Use care not to touch hot objects. Wear eye protection when working on or around the vehicle. In particular, use care when working around batteries, using solvents or compressed air.
SAFETY Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
SAFETY Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. LABELS AND PICTOGRAMS 634221 WARNING Keep entire body inside car. 27653G01 634221 WARNING Windshields do not provide protection from golf balls or other flying objects.
SAFETY Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
SAFETY Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
GENERAL SPECIFICATIONS Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. GENERAL SPECIFICATIONS MODEL: TERRAIN 1000 72V TYPE: ELECTRIC 72V POWERED TRUCK MODEL YEAR: 2014 Part No:.
GENERAL SPECIFICATIONS Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. VEHICLE DIMENSIONS 10.5 in (27.0 cm) 52.0 in (132.0 cm) (Front) 37.0 in (94.0 cm) (Rear) 38.8 in (98.6 cm) 75.3 in (191.3 cm) 111.0 in (281.0 cm) 49.8 in (126.0 cm) 36.0 in (91.
GENERAL SPECIFICATIONS Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. TURNING DIAMETER AND INCLINE INFORMATION B RECOMMENDED MAX RAMP GRADE 25% or 14o MAX RECOMMENDED MAX SIDE TILT 25% or 14o MAX TURNING CLEARANCE DIA. Approx. 24.0 ft (7.
GENERAL SPECIFICATIONS Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
INTRODUCTION Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. INTRODUCTION FEATURES General Information If the vehicle is equipped with factory installed accessories, some accessories remain operational with the key switch in the ‘OFF’ position. 12 volt accessories must be connected to the DC to DC converter. 1.
INTRODUCTION Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. 9. Direction Selector 9 Located on the seat wrap panel, the direction selector switch permits the selection of either ‘F’ (forward), ‘R’ (reverse) or ‘N’ (neutral). A reverse warning buzzer will activate when moved to the “R” position. 10.
INTRODUCTION Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. 13. Hour Meter (If Equipped) B The hour meter is located under the driver’s seat and indicates the vehicle’s total hours of operation. 14 14. Run - Tow/Maintenance/Storage Switch The Run - Tow/Maintenance/Storage switch is for use when the vehicle has become stalled, inoperative or removed from service. The switch is located under the driver’s seat.
INTRODUCTION Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. 21. Manual Bed Lift Handle There are manul bed lift handles on both sides of the vehicle, which allow the bed to be raised from either side. When bed is in lowered position, the handle functions as a latch. 21 22.
INTRODUCTION Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
INTRODUCTION Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. OPERATING PROCEDURES BEFORE INITIAL USE Read, understand and follow the safety label on the instrument panel. Be sure you understand how to safely operate the vehicle and its equipment. Maintaining good performance depends to a large extent on the operator. Improper use of this vehicle could result in severe injury or death.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. OPERATING THE VEHICLE B Improper use of the vehicle or the lack of proper maintenance may result in damage or decreased performance. Read the following warnings before attempting to operate the vehicle.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. The brake pedal is a combination brake and park brake. Depress the lower part of the pedal to slow or stop the vehicle. Park Brake Pedal OR N To engage the park brake, apply pressure to the upper section of the pedal until it locks into place. Release by pressing the lower part of the pedal.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. Run - Tow/Maintenance Switch Operation B To reduce the possibility of severe injury or death resulting from loss of vehicle control, consider the grade of the terrain the vehicle is on and set vehicle’s park brake accordingly before switching the Run - Tow/Maintenance switch to ‘Tow/Maintenance’ position.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. B Load Bed To reduce the possibility of severe injury or death, read, understand and follow the warning label affixed to the front of the load bed. Never fill a gas can in the bed of a vehicle. Static discharge could ignite gasoline vapor and cause an explosion. A load bed warning label is affixed to the front of the bed.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. Performance B Vehicles operate only when the Run - Tow/Maintenance/Storage switch is in the ’RUN’ position. The vehicle top speed is sensed and regulated directly by the controller. Speed Control To prevent the possibility of loss of control that could cause severe injury or death, use service brake to control speed.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. B Walk-Away Feature Walk-away limits vehicle movement without driver input, slowing the vehicle to 2 mph (3 kph) and sounding an audible alarm (reverse beeper). Example: If all of the following events occur: • the vehicle has been stopped for more than 1.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. • Release the park brake by depressing the service brake pedal until the park brake releases. • Slowly depress the accelerator pedal to start the motor. • When the accelerator pedal is released, the motor controls deceleration. To stop the vehicle more quickly, depress the service brake pedal.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. B SUN TOP AND WINDSHIELD (IF EQUIPPED) The sun top does not provide protection from roll-over or falling objects. The windshield does not provide protection from tree limbs or flying objects. The sun top and windshield will provide some protection from the elements; however, they will not keep occupants dry in a downpour or strong winds.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
OPERATING PROCEDURES Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. MAINTENANCE SERIAL NUMBER LOCATION Two serial number and manufacture date code plates are on the vehicle. One (PART C) is placed on the body below the front, driver side of the seat, PART D is placed on the frame weld tube. The other (PART A and PART B) is located on the crossmember section of the chassis on the driver side (seat back support).
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. VEHICLE CLEANING AND CARE To reduce the possibility of severe injury or vehicle damage, read and understand all instructions supplied by manufacturer of pressure washer. When pressure washing exterior of vehicle, do not use pressure in excess of 700 psi and maintain a 12” minimum distance from spray nozzle to painted surface.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. ENVIRONMENTAL CONCERNS B Be aware of the danger of fire when vehicle is operated over dry, combustible material. When operating vehicle, be aware of environmental hazards such as steep slopes, overhanging limbs, etc. Battery Disposal Lead-acid batteries are recyclable. Return whole scrap batteries to distributor, manufacturer or lead smelter for recycling.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. If only the front or rear of the vehicle is to be raised, place the chocks in front and behind each wheel not being raised to stabilize the vehicle. Lower the vehicle by reversing the lifting sequence. View from Underside of Vehicle WHEELS AND TIRES A tire explosion can cause severe injury or death.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. mended on tire sidewall. All four tires should have the same pressure for optimum handling characteristics. Be sure to install the valve stem dust cap after checking or inflating.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. Headlight To prevent bulb from inadvertently disconnecting and possibly melting or igniting plastic components, the locking ring MUST be reinstalled after installation of replacement bulb. Pull the locking ring straight off the back of the light housing and allow it to slide down the harness and out of the way.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. TRANSPORTING VEHICLE B Towing Use extra caution when towing a vehicle. DO NOT ride on the vehicle being towed. DO NOT attempt to tow the vehicle with ropes, chains or any device other than a factory approved tow bar. DO NOT tow the vehicle on highways. DO NOT tow a single vehicle at speeds in excess of 12 mph (19 kph).
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. Reduce the possibility of accidental starting by disconnecting battery at negative terminal before servicing. Wear eye protection when working on the vehicle. Use extra care when working around batteries, or using solvents or compressed air.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. TIRE INSPECTION Tire condition should be inspected per the Periodic Service Schedule. Inflation pressures should be checked when the tires are cool. Be sure to install the valve dust cap after checking or inflating. BRAKES Dry, Level, Clean, Paved Surface Accelerate to maximum speed.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. REAR AXLE The only maintenance required for the first five years is the periodic inspection of the rear axle for lubricant leakage. Unless leakage is evident, the lubricant need only be replaced after five years. Refer to the Service and Repair Manual for the fluid replacement procedure.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. HARDWARE Generally, three classes of standard hardware and three classes of metric hardware are used in the vehicle. Grade 5 hardware can be identified by the three marks on the hexagonal head; grade 8 hardware is identified by six marks on the head; grade 2 hardware is unmarked. The class specification is marked on metric hardware.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. Batteries are heavy. Use proper lifting techniques when moving them. Always lift the battery with a commercially available battery lifting device. Use care not to tip batteries when removing or installing them; spilled electrolyte can cause burns and damage.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. At Each Charging Cycle B To reduce the possibility of fire, never attach a battery charger to a vehicle that is to be unattended beyond the normal charging cycle. Overcharging could cause damage to the vehicle batteries and result in extreme overheating. The charger should be checked after 24 hours and unplugged after the charge cycle is complete.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. Even if the water is colorless, odorless, tasteless and fit for drinking, the water should be analyzed to see that it does not exceed the impurity levels specified in the table.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. The electrolyte in a storage battery is an acid solution which can cause severe burns to the skin and eyes. Treat all electrolyte spills to the body and eyes with extended flushing with clear water. Contact a physician immediately.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. Battery Replacement Before any electrical service is performed, the Run-Tow/Maintenance/Storage switch must be placed in the ‘Tow/Maintenance/Storage’ position.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. The ’RUN-TOW/MAINTENANCE/STORAGE’ switch, located under the driver’s seat is set to ‘TOW/MAINTENANCE/ STORAGE’ position for long term storage of the vehicle to avoid draining of the batteries. During periods of storage, the batteries will need attention to keep them maintained and prevent discharge.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. • The charger connector must be fully inserted into the vehicle receptacle. • The charger connector/cord set is protected from damage and is located in an area to prevent injury that may result from personnel running over or tripping over the cord set.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. water in a new golf car battery is 1.280 which means that the electrolyte weighs 1.280 times the weight of the same volume of water. A fully charged battery will test at 1.275 - 1.280 while a discharged battery will read in the 1.140 range. Do not perform a hydrometer test on a battery that has just been watered.
MAINTENANCE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
PERIODIC SERVICE SCHEDULE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
PERIODIC SERVICE SCHEDULE Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
APPENDIX A Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
APPENDIX A Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. 8VHU·V *XLGH SAVE THESE IMPORTANT SAFETY INSTRUCTIONS INFORMATIONS IMPORTANTES DE SÉCURITÉ Ce manuel contient des instructions importantes concernant la sécurité et le fonctionnement. This manual contains important safety and operating instructions – read before using charger.
APPENDIX A Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers. 4. Optional Charger Single-LED Display (internal or external) LED Colour Indication (following “Power-On Self Test”) Green Solid: Flashing: Charging complete. Charger in Maintenance Mode. Short: <80% Charge. Long: >80% Charge. When battery is not connected: Algorithm Number display.
APPENDIX A Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
APPENDIX B Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
APPENDIX B Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
Read the following warnings before operating vehicle: Read the following information and warnings before operating vehicle: In any product, components will eventually fail to perform properly as the result of normal use, age, wear or abuse. To prevent personal injury or death, observe the following: When vehicle is to be left unattended, engage park brake, move direction selector to neutral, turn key to OFF position and remove from key switch.
E-Z-GO Division of Textron Inc. 1451 Marvin Griffin Road, Augusta, Georgia 30906-3852 USA CONTACT US: North America: Technical Assistance & Warranty Service Parts Phone: 1-800-774-3946, FAX: 1-800-448-8124 Phone: 1-888-GETEZGO (1-888-438-3946), FAX: 1-800-752-6175 International: Phone: 001-706-798-4311, FAX: 001-706-771-4609 Service Parts Manuals, as well as Repair and Service Manuals are available from a local Distributor, an authorized Branch, Genuine E-Z-GO Parts & Accessories Department or at www.
